Traditional mesh partition

Mesh cages and mesh partitioning systems

Officestor offers several solutions for effective mesh partitioning of a storage area or working environment.  Traditional single skin mesh partitioning allows you to separate areas or zones in warehouses, storerooms and quarantine areas.   Solid partitioning offers a different type of solution, for example, where there is a need to separate work or storage areas within a larger overall space. Officestor has a range of single- and double-skin partitioning systems, with the extra skin adding a smooth interior finish as well as additional sound reduction. These systems can also be fitted with glazing.

Traditional mesh partition

traditional single skin partitioning

An ideal solution where a high quality and cost effective partitioning system is required for separating work or storage areas

Specification Panels are constructed from 43 x 43 x 1.2 mm (18g) cold-rolled angles and 32 x 32 x 0.7 mm (22g) cold-rolled T bars. Panels are available in solid, mesh or solid/glazed/solid elevations. Choice of powder coated finishes. Demountable and relocatable. Ceiling solutions available to complement our partitioning.
Heights

 2400, 2700, 3000 mm

Widths 1000 mm
Dado height 1200 mm
Thickness 43 mm
 

A range of infill and special sized panels can be supplied to achieve final dimensions. Side hung and sliding door options available.

Mullion sizes

50 x 50 x 2.5 mm up to 2,700 mm high

80 x 40 x 2.5 mm 2,700 mm and above

100 x 50 x 3.0 mm to suit installation

 

All Two-Way (intermediate) mullions have base plates for floor fixing. Knee braces and/or ladder mullions may be fitted for extra stability and strength.

Double skin glazed partitioning

Traditional double skin partitioning

An alternative higher quality partitioning system where a smooth interior finish or good sound reduction is required. Ideal for works offices, clean rooms and storage areas for chemicals and food products.

Specification Panels are constructed from 25.4 x 42 x 25.4 x 1.2 mm (18g)cold rolled channels panelled both sides with 0.8 mm (21g)CR4 mild steel sheet with 30 mm Rockwool mineral fibre infill and are joined together using an ‘H’ section. Panels are available in solid, half-glazed, solid/glazed/ solid or borrowed light elevation. Choice of powder coated finishes. Demountable and relocatable. Ceiling solutions available to complement our partitioning.
Heights

 2400, 2700, 3000 mm

Widths 1000 mm
Dado height 1200 mm
Thickness 47 mm
 

A range of infill and special sized panels can be supplied to achieve final dimensions. Side hung and sliding door options available.

Mullion sizes

50 x 50 x 2.5 mm up to 2,700 mm high

80 x 40 x 2.5 mm 2,700 mm and above

100 x 50 x 3.0 mm to suit installation

 

All Two-Way (intermediate) mullions have base plates for floor fixing. Knee braces and/or ladder mullions may be fitted for extra stability and strength.

Double skin glazed partitioning

Baxcrest Traditional Mesh Partitions

Contact us

Let us know your requirements

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

Related case studies